Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RADILON ADLINE CS CF10 HP BK - PA666-CF - RadiciGroup High Performance Polymers

Material Data Center offers the following functions for RADILON ADLINE CS CF10 HP BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Radilon A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
PA6/66 copolymer 10% carbon fibre reinforced for 3D Printing Fused Deposition Modelling.

Suitable for parts requiring stiffness, high dimensional stability and very reduced shrinkage. The material offers good surface aspect and easy processability.
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 3850 / - MPa ISO 527
항복강도 65 / - MPa ISO 527
항복변형률 3.5 / - % ISO 527
파단시 평균신율 18 / - % ISO 527
챠피 충격 강도 , +23°C 60 / - kJ/m² ISO 179/1eU
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 195 / * °C ISO 11357-1/-3
기타 특성건조/응축단위시험규격
물에서의 흡수성 9 / * % ISO 62와 유사
조건에서의 흡습성 2.6 / * % ISO 62와 유사
밀도 1160 / - kg/m³ ISO 1183
특징
생산 공정
사출 성형, Additive Manufacturing
인도 유형
과립, 검정
특성
Copolymer
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
기타 정보
사E성
The material is available in granules or in filament – 1.75 mm and 2.85 mm diameter.
In the case of granules, the material is delivered in moisture-proof packaging ready for processing. Maximum recommended water content for best processing is 0.10%. Typical conditions with a desiccant drier: temperature 80 ° C, dew point -20 ° C or below, time 2-4 h or more. In the case of filaments, the material is originally sealed in vacuum bags with silica gel inside to keep environment in dry conditions. For best printing results, it is recommended to pre-dry the filament at 70-80°C for 2-4 h or more. Alternatively, Radilon® Adline filaments are compatible with Drywise system from Thought3D Ltd. 

Recommended 3D-Print processing parameters:
 
Nozzle Temperature Bed Temperature Adhesion promoter Print Speed
250°-280°C 70-100°C Magigoo glue 30-40 mm/s


Please note: Parameters are dependent on printer used.
Radici tests were performed on a Ultimaker S5 printer
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.